Guide: How to Take Part in the NASDEX IDO on Starter
A step-by-step guide on how to take part in the next QuickStart IDO on Polygon (MATIC)
If you are new to Polygon, IDOs, or crypto in general and want to get involved in the next highly-anticipated QuickStart IDO, NASDEX, then this guide will walk you through everything you need…
If you have yet to discover NASDEX, then here is a short introduction: https://starterxyz.medium.com/nasdex-the-new-home-of-tokenized-equities-is-coming-to-starter-394aa718c19d
And don’t forget, you need to complete KYC with NASDEX’s partner, for the IDO. You can do that here: https://verify-with.blockpass.org/?clientId=kyc_for_nasdex_ido_6ec2f&serviceName=KYC%20for%20Nasdex%20IDO&env=prod
The short version
The long version
What do I need?
Currently, you require four tokens to take part in any Starter IDO on Polygon:
START & QUICK (for LP), MATIC for gas fees, and USDC to buy in the IDO.
MATIC is the network token of Polygon (like ETH is to Ethereum). START is the token of our platform, Starter. And QUICK is the token of our partner in the Polygon ecosystem, QuickSwap.
These are the 3 reasons you will need each of these tokens to take part in an IDO on Starter:
1. Qualify for an IDO
Eligibility to take part in IDOs on Starter will not work in the same way as it does on Binance Smart Chain. To be eligible for Polygon IDOs on Starter.XYZ, you will need to stake QUICK/START LP (Liquidity Pool Tokens) on the QuickSwap rewards section of the website.
To obtain QUICK/START LP tokens you must visit Quickswap.Exchange and add equal amounts of START and QUICK token to the liquidity pool — in return for adding these two tokens you will be given QUICK/START LP tokens. You can exchange your QUICK/START LP tokens for your QUICK and START tokens on the QuickSwap DEX at any time (dependent on current values).
Here is a shortcut to the QUICK/START Liquidity Pool on QuickSwap DEX: https://quickswap.exchange/#/add/0x831753DD7087CaC61aB5644b308642cc1c33Dc13/0x6Ccf12B480A99C54b23647c995f4525D544A7E72
A step-by-step guide on how to do this can be found further down the guide.
2. Gas Fees
In the same way that BNB is used to pay for the gas fees of your transactions on Binance Smart Chain, MATIC token is needed for payment of your gas fees on Polygon. Therefore, you will always need a little MATIC in your wallet to pay for the gas fees of a transaction to buy or claim tokens in a Starter IDO.
If you are buying QUICK on Polygon for the first time, you will probably also need MATIC to buy it. We go into detail on how to get MATIC on Polygon below.
3. Currency to Buy in IDOs on Starter
Starter allows the IDO creator to choose the token they want to raise their funds in. The token they choose will be the token that Starters are required to use to buy IDO tokens (and therefore have in their wallet) — on Polygon, these are currently limited to QUICK, MATIC, and USDC.
The NASDEX IDO will utilise USDC as the currency to buy $NASDEX tokens in the IDO.
We have split this guide into two parts. Part 1 will focus on how to create an online wallet, whereas Part 2 will focus on how to obtain your QUICK/START LP, MATIC and more. So if you already have your online wallet set up on Polygon, skip ahead to Part 2 by scrolling down, now.
Part 1: Setting up an online wallet
Before you buy any of the tokens or LP tokens mentioned above, you will first need to set up an online wallet. At Starter we support a large number of the most popular wallets, including MetaMask, TrustWallet, Ledger, and Trezor.
Most wallets are set up for the most popular network by default (Ethereum), for most online wallets you will need to manually add the Polygon Network so your online wallet can interact with websites and DApps that run on Polygon.
If you want to use a wallet on your mobile, PC or Mac, then we recommend MetaMask.
Please visit the official MetaMask website here to download the wallet: https://metamask.io/index.html
Please note, once you have downloaded and installed MetaMask, its default network will be Ethereum, you will need to manually set up the Polygon (MATIC) network following the simple instructions below:
Connect MetaMask to MATIC Custom RPC/Mapping Mainnet
You’ll need to configure the Matic Network custom RPC to your MetaMask. It’s pretty simple and straightforward, and it’s easy to switch back and forth between Layer 1 and Layer 2 using the button near the top of the MetaMask application.
- Click on the network selection button on the top of the app (it will probably say Ethereum Mainnet)
- Click on the “Custom RPC” to add the Matic mainnet information.
- Select “Custom RPC”.
After clicking “Custom RPC”, a screen will appear allowing you to set up the custom RPC for Matic Network.
Enter in the Matic mainnet details as follows:
Network Name: Matic Mainnet
New RPC URL: https://rpc-mainnet.matic.network (full list of MATIC RPCs here: https://docs.matic.network/docs/develop/network-details/network/)
Chain ID: 137
Block Explorer URL: https://explorer.matic.network/
Be sure you don’t miss any of the above fields. Once you’ve added the details click on the “Save” button. You’ll then be connected to the Matic mainnet.
You can now close the dialog box.
You will need to make sure your Metamask is on the MATIC network every time you want to interact with the Starter website on Polygon or QuickSwap Exchange. If you are on the wrong network, the website will prompt you to change your network, or offer you an option to do it for you.
Now we have our online wallet created and set up on the Matic Mainnet, the next step is to acquire the various tokens we will need to take part in a Starter IDO! On to Part 2!
Part 2: Acquiring tokens on Polygon
As we spoke about further up the article, currently, you require three tokens to take part in any Starter IDO on Polygon:
START & QUICK (for LP), and MATIC.
If you are buying START and QUICK on-chain using decentralised exchanges such as Sushi Swap or QuickSwap, then you will need to buy them using MATIC.
MATIC will also pay for all your gas fees for every transaction on the Polygon Network, so you will always need a little in your wallet (at least $20 worth to be safe).
Using a Centralised Exchange
If you aren’t worried about KYC, then using a centralised exchange such as MXC or Gate.io (that support the Polygon Network) is the easiest way to get hold of MATIC. You can use a credit card or a bank transfer to buy USDT and then use this to buy MATIC, in some cases, the exchanges will allow you to buy MATIC directly with your credit card.
Once you buy it on the exchange, you can send it directly (withdraw) from your wallet on the exchange to your MetaMask or TrustWallet, etc — so long as your online wallet supports the Polygon Network.
For more details on where to buy MATIC visit their official website here: https://polygon.technology/matic-token/
Please note: Some of the above exchanges do not support the Polygon Network yet, and will only sell MATIC based on the Ethereum Network — if you have MATIC on Ethereum you will need to send it over the Polygon bridge to deploy it on Polygon.
If you want to use a Decentralised Exchange to buy MATIC, you will need to either send some of your tokens over from Ethereum using the bridge, or buy MATIC on Ethereum using something like Uniswap, and send your MATIC tokens over the bridge, to your online wallet.
Acquiring START, QUICK, and QUICK/START LP Tokens
In order to buy QUICK/START LP tokens (and be eligible for an IDO on the Starter.XYZ platform), you will need to first provide liquidity to the QUICK/START pool on Quickswap.Exchange.
Before you get your LP tokens from the QuickSwap.Exchange, you will first need both START and QUICK tokens.
As with staking START on BSC, the more QUICK/START LP you stake, the more your allocation will be in IDOs.
Here are the number of QUICK/START LP tokens you need to reach the different tiers on Starter:
To work out how many QUICK and START tokens you need to get the number of LP tokens you want, input your START and QUICK token numbers on the Liquidity Pool interface on QuickSwap and click ‘Supply’.
(Please note: The exact number of tokens needed will change depending on fluctuations in the value of QUICK & START).
This will trigger a pop-up, that will confirm how many LP tokens you will receive for your START and QUICK.
Click ‘Confirm Supply’ to add your START and QUICK tokens and receive your QUICK/START LP Tokens.
Here is a direct link to the QUICK/START Liquidity Pool: https://quickswap.exchange/#/add/0x6ccf12b480a99c54b23647c995f4525d544a7e72/0x831753dd7087cac61ab5644b308642cc1c33dc13
Once you provide liquidity (by adding equal amounts of QUICK and START tokens to the Liquidity Pool) you will receive LP tokens in return. You will need to stake the LP tokens on QuickSwap.Exchange to be able to buy in an IDO, and earn staking rewards.
To understand how to get QUICK or START tokens, then follow the steps below:
How to get QUICK tokens
Much like buying MATIC tokens, you can get QUICK tokens via two main routes, a centralised exchange or via a decentralised exchange on the Polygon network using MATIC.
1.Using a centralised exchange
Currently, BKEX, MXC, and Gate.io sell QUICK tokens (paired with USDT). You can buy USDT using your credit card, or send it over from another centralised exchange app you have set up — and buy your QUICK tokens.
Once you have purchased them, you can send them directly to your online wallet on the MATIC mainnet using the ‘Withdraw’ function.
2. Using QuickSwap
QUICK can be easily obtained from Quickswap.Exchange, there are three pools with multi-million dollar liquidity you can use.
How to get START tokens on Polygon
There are currently two main ways to get START tokens on Polygon.
- Send your START across from Binance Smart Chain
The first, and easiest way for many of our longtime Starters, will be to send your START tokens from Binance Smart Chain over to Polygon using the START bridge.
This is very simple and costs nothing but a little time — approximately 10 minutes.
We utilize the AnySwap/Multichain.xyz networks to deliver a seamless experience to our community.
Follow the instructions below to help you get started.
Visit the START token bridge on AnySwap.exchange: https://anyswap.exchange/bridge?inputCurrency=0x6ccf12b480a99c54b23647c995f4525d544a7e72&network=polygon
Connect your MetaMask to Polygon: https://dappradar.com/blog/set-up-metamask-on-layer-2-and-avoid-ethereum-gas-fees
Perform your Cross Chain Deposit using the image below:
2. Buy $START tokens on QuickSwap using QUICK
Currently, the only place on Polygon you can buy $START tokens is QuickSwap.Exchange. The pair is QUICK/START, which means you need to use QUICK tokens to buy START and when you sell START you will receive QUICK tokens in return.
Here is the direct link to the QUICK/START pair to buy START on QuickSwap Exchange: https://quickswap.exchange/#/swap?inputCurrency=0x6ccf12b480a99c54b23647c995f4525d544a7e72&outputCurrency=0x831753dd7087cac61ab5644b308642cc1c33dc13
How to get USDC tokens on Polygon
If you need USDC then getting it is super easy. It is a US dollar-pegged stablecoin — so 1 USD = 1 USDC.
You can buy USDC from most major centralised exchanges such as Coinbase and Gate.io, as well as on major DEX’s such as QuickSwap.Exchange. If you buy your USDC on a Centralised Exchange, just make sure they support transferring tokens on the Polygon Network first.
Our top tip to save on time is to work out however much USDC you need for the IDO and buy that amount in MATIC. You can then easily trade your MATIC for USDC on Quickswap.Exchange.
The Final Step: Stake your QUICK/START LP Tokens
So, your online wallet is set up. It’s loaded with a little MATIC, and most importantly, your QUICK/START LP tokens.
Now, all you need to do to make sure you are eligible to take part in an IDO on Starter on Polygon is stake your QUICK/START LP on QuickSwap.Exchange and you are good to go!
Here is the direct link of where to stake: https://quickswap.exchange/#/quick/0x6Ccf12B480A99C54b23647c995f4525D544A7E72/0x831753DD7087CaC61aB5644b308642cc1c33Dc13/0x77eB20d5eB77b6ba543734d903FE1259d551cbd3
Once you have staked your QUICK/START LP on Starter.xyz or Quickswap.Exchange, you can check your eligibility by connecting your wallet to the Starter Dapp and clicking ‘Staking’.
✉️ Telegram: https://t.me/starterxyz
🐦 Twitter: https://twitter.com/starterxyz
🔊 Announcements: https://t.me/starter_announcements
🟧 START BSC Contract: https://bscscan.com/token/0x31d0a7ada4d4c131eb612db48861211f63e57610
🟪 START Polygon Contract: https://polygonscan.com/token/0x6ccf12b480a99c54b23647c995f4525d544a7e72
🟦 START Ethereum Contract: https://etherscan.io/token/0x1d7ca62f6af49ec66f6680b8606e634e55ef22c1
⬜️ START Fantom Contract: https://ftmscan.com/token/0x8ca2ecbce34c322fcea6db912d9dbfd2dda5920d
🟥 START Avalanche Contract: https://avascan.info/blockchain/c/token/0xF44Fb887334Fa17d2c5c0F970B5D320ab53eD557
The leading IDO launchpad, incubator, and investor network for Polygon, Ethereum, Fantom and Binance Smart Chain $START https://starter.xyz